| Contact/联系方式 |
|
Tel:+86-21-61993126
Fax:+86-21-61927327
E-mail:info@seabil.com |
 | | |
|
| 557.202.405 PSB800M Marine Panel Power Supply |
   |
The MX power PSU800 and PSB800 supply module usedfor the MX/ZX Range of fire controllers based on thedesigner housing (not MX2) is a state-of-the-art integratedswitch mode system power supply and battery charger,which can provide up to 5A external and auxiliary looppower during alarm conditions. It has a universal inputallowing operation from 100 to 255 Va.c., 50 or 60 Hz. Thepower supply is approved worldwide to EN54, UL864 andMarine standards.
The charging voltage is temperature compensated. ThePSM recharges the batteries within 24 h for the followingtimings:
> 90h stand by time and 15 min. alarm condition
> 72h stand by time and 30min. alarm condition
The power supply provides full condition and faultmonitoring to the system via the FIM (used by the PSB800)or addressable power supply monitor APM800 (used by thePSM800). The PSB800 incorporates the LBM800 boostermodule to provide the correct voltage levels to maximisethe performance of the MX DIGITAL protocol.
Faults signals (Loss of AC, Battery charger fault, Batteryfault) and control inputs (Battery test, Output reset) areprovided. Battery voltage and charger current readings arealso provided to the FIM or APM for automatic batterytesting.
Screw terminals provide 2 x 24V outputs (24 V stabilised,24V stabilised with reset control) and one 5V output.The power supply is fitted in a steel cage with mountingpoints to allow any of the following boards to be mounted:
> APM800 addressable power supply monitor
> FB800 fuse board with 15 x 24Vdc fused spurs
> IOB800 input/output expansion board
A PSB 800K Power Expansion Kit is required to power theXLM 800 pcb on 4 loop systems which require theextended loop power capability. It consists of a PSM800power supply module, an APM 800 addressable monitormodule, a battery connecting cable and an XLM800 toAPM800 connecting cable and may be fitted onto thechassis plate in the battery housing.
| Technical Specification |
|
| Dimensions: |
50H x 114W x 190D mm |
| Weight: |
0.9Kg |
| Input Voltage: |
120-240 Vrms, 50/60Hz |
|
(Auto ranging) |
| Input Current: |
0.8-1.6ARMS Rated Load |
| Max. charge current: |
Up to 3.8A |
|
(dependant on standby current) |
| Max. battery size |
|
| (24hr charge): |
38Ah |
| Max. total supply current: |
5A@24Vdc |
| Maximum external current: |
4A@24Vdc |
| Output Voltages: |
24Vdc |
|
(22.8-26.4V) |
| Non-resettable: |
24Vdc@4A |
| Resettable: |
24Vdc@4A |
|
5Vdc@3A |
| Power Consumption: |
PSB-90mA |
|
(quiescent & alarm) |
|
PSM - 65mA |
|
(quiescent & alarm) |
We supply 557.202.405 PSB800M Marine Panel Power Supply worldwide and other Tyco/Thorn products at competitive prices,such as fire and gas detection alarm control panel,smoke detector,temperature heat detector,flame detector,multi-sensor detector,explosion-proof detector,water-proof detector,CO detector,gas Detector,manual call point,audible and visual alarm device,detector base,isolator,safety barrier,I/O interface unit, module card, PCB circuit boards, fire door control unit, spray nozzle/sprinkler,test tools and other spare parts.
We also provide Tyco/Thorn project design,system integration,equipment selection,system commissioning,system maintenance and repair worldwide.
Contact us for more information.
我们在全球范围内以具有竞争力的价格提供包括557.202.405 PSB800M Marine Panel Power Supply在内的泰科/科艺火灾探测报警控制器、感烟雾探头、感温度探头、火焰探头、气体探头、一氧化碳探头，多功能复合探头、防爆探头、防水探头、手动报警站、探头底座、声光报警设备、隔离安全栅、输入输出接口单元、模块卡件、门控单元、喷头喷嘴、维修测试工具、电路板等备件。
我们也在全球范围内提供泰科/科艺整个消防项目设计、设备选型、系统集成、系统调试、系统检测及维修保养服务。
更多信息请联系我们。
Project Case: Tyco/Thorn Fire and Gas Detection Alarm System Application
项目案例：泰科、科艺火灾报警与气体探测系统应用
|
| |
